SaniSump
$1,454.99Dometic SaniSump, avaiable in 12 Volt or 24 Volt configurations.
Showing 199–216 of 244 resultsSorted by popularity

Dometic SaniSump, avaiable in 12 Volt or 24 Volt configurations.

Rebuilt VGII vacuum pump assemblies. Great way to service your system is you need a pump rebuild and do not have a proper tech locally. Available in 12 Volt or 24 Volt.

The Aqua-Polish® No. 20 Cartridge is designed to treat large particulates and sediment in your water supply using high-efficiency absorption technology, ensuring optimal flow rates and filtration capacity. It is specifically a replacement cartridge, not intended for removing microbiological contaminants, but ideal for extending the life of Seagull IV® purification systems. The cartridge features a 3-micron particle retention rating, a flow rate of 7.5 GPM, and is suitable for cold water use, handling up to 10,000 gallons depending on water quality, and fits a #20 Pre-Filter housing.

Guidi “L” water strainer in nickel-plated bronze, 1164-01. Available in various sizes listed in the sizing chart from 3/4″” to 2″. Some pipe diameter sizes are only available via special order. Additionally, not all sizes shown in the sizing chart are carried. This listing is for the 1164 nickel-plated bronze units. This unit uses the clear polycarbonate cover KIT1162DI and cover ring KIT1162AN to allow visibility inside the strainer basket. The L configuration refers to the L shape path of the flow with one port on the side of the unit and another at the bottom.

Guidi straight water strainer in nickel-plated bronze, 1162-01. Available in various sizes listed in the sizing chart from 1/2″ to 3″. Some pipe diameter sizes are only available via special order. Additionally, not all sizes shown in the sizing chart are carried. This listing is for the 1162 nickel-plated bronze units. This unit uses the clear polycarbonate cover KIT1162DI and cover ring KIT1162AN to allow visibility inside the strainer basket. It features a horizontal configuration with intake and exhaust at opposite sides towards the top of the unit.

Guidi female to male reducing nipple bronze pipe fitting 0246B-01. Available in various sizes as per the size chart. This fitting will allow you to reduce the diameter of an existing male pipe nipple to a number of predetermined available pipe diameters. It will yield a reduced diameter male nipple.

Guidi male to female bushing bronze pipe fitting. Available in various sizes as per the size chart. Please note the difference in the lower inner flange between figures 1 and 2. The sizing chart denotes which sizes correspond to figure 1 and which sizes correspond to figure 2.

Guidi male to female 45 degree bronze elbow. Available in various sizes as per the size chart. Sizes start at 3/8″ and go all the way up to 4″. Allows the addition of a 45 degree elbow while continuing the gender of the source fitting.

Guidi female to female 45 degree bronze elbow. Available in various sizes as per the size chart. Sizes start at 3/8″ and go all the way up to 4″.

Guidi female to female bronze elbow. Available in various sizes as per the size chart. Sizes start at 3/8″ and go all the way up to 4″.

We offer this Deutsch Connector as an optional installation included with you pump motor in order to make your job easier. Simply add this connector to you purchase when ordering a Dometic / Sealand pump motor.

These water tanks are suitable for storing potable water, freshwater, and wastewater (grey water, black water). Trionic water and wastewater holding tanks are rotationally molded into durable, seamless, one-piece, non-corrosive tanks. Blank tanks come without any fittings, allowing the user to locate fittings in the exact locations needed for their application. Trionic Corp’s CF-60 Custom…

These water tanks are suitable for storing potable water, freshwater, and wastewater (grey water, black water). Trionic water and wastewater holding tanks are rotationally molded into durable, seamless, one-piece, non-corrosive tanks. Blank tanks come without any fittings, allowing the user to locate fittings in the exact locations needed for their application. Trionic Corp’s CF-60 Custom…

These water tanks are suitable for storing potable water, freshwater, and wastewater (grey water, black water). Trionic water and wastewater holding tanks are rotationally molded into durable, seamless, one-piece, non-corrosive tanks. Blank tanks come without any fittings, allowing the user to locate fittings in the exact locations needed for their application. Trionic Corp’s CF-60 Custom…

This is an after market replacement key for Dometic’s Tank Level Panels. The panels include 201, 202, 301, and 302 panels. Related panel part numbers: 385311280 385311493 385311494 385311282 385311495 385311496

Guidi bronze drain plugin with neoprene O-ring seal. Available in 1/4″ and 1/2″ sizes. Some sizes may only be available via special order.

Guidi nylon handle key for water strainer covers – KITCH1160-02. This nylon wrench is the ideal tool for loosening Guidi clear strainer covers like the KIT1160 cover during regular maintenance. The nylon handle and gripping section are one piece and strong enough for the task while also preventing scratches on your strainer lids. Some sizes shown in the sizing chart may only be available via special order. Please contact us if you need a size that is not shown as available.
Download Size Chart Nylon Handle Key KITCH1160-02 for Water Strainer Covers

Guidi non-transparent nickel-plated bronze cover for water strainers KIT1163CN-01 is available in various sizes. This solid, non-clear lid is the ideal cover solution for Guid water strainers when being able to see inside the strainer basket is not needed.
Some sizes shown in the sizing chart may only be available via special order. Please contact us if you need a size that is not shown as available.
Download Size Chart for Nickel-Plated Bronze Filter Cover KIT1163CN-01